Description

This Combo contains:
5 XGuard Pro C75 Power Systems
5 XGuard Remote Boards
5 XGuard Strobe Lights
1 XGuard Log Display Screen

 

XGuard Pro C75 Features

Backup Power Pack with 75 Farads capacitors
Overvoltage protector
Reverse polarity protector
Short Circuit protector
Servo Back EMF protector
Static electricity protector
200 event Logger
2-ports Telemetry for Mikado, Spektrum and expansion module to Futaba and for Jeti
Fault tolerant design
Remote Board port for controlling the system from a small board
Strobe Alarm Light port
LOG Display Screen available form the remote board
Four Ports Master + Slave In and Out
Slow current draw ramp up to prevent overwhelming the ESC
Protection against over-charging above 8.1V
Connectors to avoid soldered wires that can fatigue and break
Real-Time Operating System, Mission Critical Coding

Modes

1. ESC mode for small undervoltage sensing
2. BATT mode for receiver battery pack empty sensing
3. Daisy chainable for large Aircraft

 

XGuard Remote Board:

1. Place XGuard anywhere hidden in the aircraft
2. It has all the same indicator LEDs and Buttons plus additional features
3. Hot pluggable

 

Telemetry Ports

1. Two ports
2. Spektrum and it’s compatibles
3. Mikado and expandable for Futaba S-Bus and Jeti

 

Alarm Flash indicator

1. Photo Camera-type flashlights
2. Built-in voltage booster to work even when caps are low in voltage
3. Extremely low consumption via burst compression
4. PC Board thickness so ceramic components don’t crack from vibration or torsion and screw placement
5. Also available 100dB audible alarm

 

LOG Display

1. Up to 200 events stay in permanent memory until another event happens in a different power up.
2. Log Monitor LIVE vs LOG
3. Hot pluggable